Home > News

Coupling packaging and punching treatment

31

2019-07

Coupling packaging and punching treatment

Rigid Flexible Coupling Manufacturer shares that Coupling production and processing have rough car production and processing, fine car production and processing, general car production and processing, CNC machining center production and processing, coupling pulse damper itself is a spare part, light quality, can use zto express, three or four days can be delivered to the customer, greatly reducing the middle time. Diaphragm coupling is a kind of elastic coupling with high quality, which can compensate for the relativity deviation between two shafts. It needs to buffer the vibration when running, and it is simple to construct and convenient to disassemble.

Coupling production and processing have rough car production and processing, fine car production and processing, general car production and processing, CNC machining center production and processing, coupling pulse damper itself is a spare part, light quality, can use zto express, three or four days can be delivered to the customer, greatly reducing the middle time. Diaphragm coupling is a kind of elastic coupling with high quality, which can compensate for the relativity deviation between two shafts. It needs to buffer and absorb vibration when running, and it is simple to construct, convenient to disassemble, reliable in work, fast in supply and meet the market demand. Pulse dampers are usually 0.4-0.6mm stainless steel plates used in groups.

Coupling rules and tempering treatment, heat treatment are regulation, are aging treatment, according to the structure of the aging treatment to change material, improve the ductility and strength of aging treatment for HRC HRB, usually in HRC, usually in the process of operation to HRC20 - among 40 degrees, as for machining is easy, if you exceed 40 degrees, coarse and fine models have to use the unique blade, and milling rate is slow, significant comprehensive man-hour costs increase is quite big, aging treatment of metal material is usually 50 cr, some is 43 crmo, some material can't find the unique, On the use of general aging treatment of high temperature solution to exceed the relative provisions.

Flexible Coupling Manufacturer

The couplings must be packaged after they are manufactured. Some couplings have aluminum cover on the surface to prevent them from falling, and some freight logistics have short-distance transportation and direct handling for several times, which may lead to surface scratches. To prevent this problem, the customer may cause time and money damage, which requires the coupling manufacturer to do a good job of packaging in front of the original factory. Two parts of the red plum star coupling or three parts of the sliding block coupling have to be fixed fixed with thin wire, afraid of falling consistent are packed in wooden boxes. Pulse dampers are usually sent zto express, although the transport costs are higher, usually use sf express to show the paper box, lining packaging plastic thick film, faster, safety. The larger items are usually felt and wrapped in two loops of tape, sometimes in chemical fiber bags or cardboard boxes.

Coupling holes are usually divided into several categories, this is the rocker arm drill, this is the bench drill, this is the CNC machining center. Size and specified precision of hole divider. The hole is divided into straight hole and cone hole. Taper hole to play the bottom hole before using milling cutter. The semi-coupling of malleable column pin coupling is made of taper hole, which is usually produced and processed by bench drill or rocker arm drill. The pin hole is straight hole, which can be rocker arm drill, and can also be processed by CNC machining center. Rocker arm is drilled add work station and rotate workbench to be able to open hole normally, the actual operation that some also basis worker old master is habitual, can draw a line to still can numerical control machining center beans cent, this kind cannot be changed normally. CNC machining center deep processing can be exchanged, but the cost increased. Convenient in the application of installation, if the column pin or malleable sleeve failure maintenance, can be no hole, simple and convenient, reduce the comprehensive working time, another if can not be exchanged, will also cause uneven support.


FREE INQUIRY
CONTACT US
  • Tel: +86 523 8463 4389
  • Fax: +86 523 8450 5216
  • Factory address: No.11 Fuyang Road, ChengNan Industry Park, Jingjiang, Taizhou, Jiangsu, China.
  • Tel: +86 512 8616 3031
  • Fax: +86 512 8616 3026
  • E-mail: sales@hdcoupling.com
  • Head office address: Room 1516, Modern Plaza B, No.8 Weiye Road, Kunshan, Jiangsu, China.

Copyright © Jingjiang Huading Machinery Manufacturing Co., Ltd. All Rights Reserved    

sitemap